diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
new file mode 100644
index 0000000..10791be
--- /dev/null
+++ b/include/configs/ls1028ardb.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef __LS1028A_RDB_H
+#define __LS1028A_RDB_H
+
+#include "ls1028a_common.h"
+
+#define CONFIG_SYS_CLK_FREQ		100000000
+#define CONFIG_DDR_CLK_FREQ		100000000
+#define COUNTER_FREQUENCY_REAL		(CONFIG_SYS_CLK_FREQ / 4)
+
+#define CONFIG_SYS_RTC_BUS_NUM         0
+
+/* Store environment at top of flash */
+#define CONFIG_ENV_SIZE			0x2000
+
+#define CONFIG_DIMM_SLOTS_PER_CTLR          1
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_QIXIS_I2C_ACCESS
+#define CONFIG_SYS_I2C_EARLY_INIT
+
+/*
+ * QIXIS Definitions
+ */
+#define CONFIG_FSL_QIXIS
+
+#ifdef CONFIG_FSL_QIXIS
+#define QIXIS_BASE			0x7fb00000
+#define QIXIS_BASE_PHYS			QIXIS_BASE
+#define CONFIG_SYS_I2C_FPGA_ADDR	0x66
+#define QIXIS_LBMAP_SWITCH		2
+#define QIXIS_LBMAP_MASK		0xe0
+#define QIXIS_LBMAP_SHIFT		0x5
+#define QIXIS_LBMAP_DFLTBANK		0x00
+#define QIXIS_LBMAP_ALTBANK		0x00
+#define QIXIS_LBMAP_SD			0x00
+#define QIXIS_LBMAP_EMMC		0x00
+#define QIXIS_LBMAP_QSPI		0x00
+#define QIXIS_RCW_SRC_SD		0xf8
+#define QIXIS_RCW_SRC_EMMC		0xf9
+#define QIXIS_RCW_SRC_QSPI		0xff
+#define QIXIS_RST_CTL_RESET		0x31
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x10
+#define QIXIS_RCFG_CTL_RECONFIG_START	0x11
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
+#define QIXIS_RST_FORCE_MEM		0x01
+
+#define CONFIG_SYS_FPGA_CSPR_EXT	(0x0)
+#define CONFIG_SYS_FPGA_CSPR		(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
+					CSPR_PORT_SIZE_8 | \
+					CSPR_MSEL_GPCM | \
+					CSPR_V)
+#define CONFIG_SYS_FPGA_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
+					CSOR_NOR_NOR_MODE_AVD_NOR | \
+					CSOR_NOR_TRHZ_80)
+#endif
+
+/* SATA */
+#ifndef CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT2
+#endif
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
+#define CONFIG_SYS_SCSI_MAX_LUN			1
+#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+#define SCSI_VEND_ID 0x1b4b
+#define SCSI_DEV_ID  0x9170
+#define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SATA1                        AHCI_BASE_ADDR1
+
+#endif /* __LS1028A_RDB_H */